Domestic & Commercial Energy Performance Certificates (EPC) Kingston-upon-Hull
We provide EPC in Kingston-upon-Hull for both Domestic and Commercial properties. A valid EPC is required to be in place before the sale or rental of your property. The EPC survey itself is entirely non intrusive and so won't damage the building in any way. Once the survey is complete the EPC report will be produced, which gives the building an Energy Performance Rating rating on a scale from A to G.
For most rental properties an EPC rating of E or better is required, in compliance with the Minimum Energy Efficiency (MEES) legislations of 2018. For properties for sale, MEES legislation does not yet apply, however an ever increasing number of financial institutions require properties to demonstrate they would be MEES compliant before agreeing mortgage funding etc.
For properties for which we have produced an EPC in Kingston-upon-Hull, if shown not to meet MEES targets, we can then provide tailored advice on the least disruptive and most cost effective ways to improve the building to achieve the targeted rating. We are happy to provide more in depth MEES advice, including on MEES Exemptions so please Contact US for more information.
Carried out by one of our fully accredited Domestic Energy Assessors (DEA), the EPC survey will look at the way the property is constructed, heated (including water heating), insulated, ventilated and lit. The survey does not look at the way the property is used by the residents, so excludes appliances and does not take into account things such heating patterns, instead using a standard set of assumptions about how the house is lived in. This allows for a fair comparison between different properties.
The survey is entirely non invasive. The assessor will not drill any holes or unscrew any access panels. For any insulation added to the property since its original date of construction to be included, the assessor will need to be able to visually evidence it on the day (over 75 % of its area for loft insulation, and in multiple locations for wall insulation), or be provided with documentary evidence, such as an installer's receipt.
Where neither documentary evidence or visual inspection can be used to evidence insulation etc, the assessor will class this element as ‘as built’. The EPC calculation will then make an assumption about what is there, based on the age of the building and the building regulations that were in place at the time of construction. The assessor does not make, or have any control over, these assumptions.
It usually takes around 30 mins to conduct an EPC survey for an average 3 bedroom house. There is then a 2 day processing period after which you will receive an invoice, followed by the EPC documents immediately on payment.
We are happy to provide more in depth advice on Domestic EPCs, including on Domestic EPC exemptions. so please Contact Us for more information.
Carried out by one of our fully accredited Non-Domestic Energy Assessors (NDEA), the Commercial EPC survey will look at the way the property is constructed, conditioned (including for water heating), insulated, ventilated and lit. It also takes into account the different activities that take place within each zone of the property.
The Commercial EPC survey is entirely non invasive. The assessor will not drill any holes or unscrew any access panels. Any elements of the building and its systems that cannot be visually inspected during the site visit can also be accounted for by documentary evidence. Please provide in advance, or make available on the day, any documentation you may have relating to the construction of the building and the make and model of any HVAC systems, lighting designs etc.
For any elements of the building that can not be visually inspected or evidenced by documentation, a set of default assumptions have to be made. These assumptions use ‘worse case scenario’ default values, and as such can lead to a worse EPC rating.
The Commercial EPC process does not take into account energy used by commercial processes taking place within the building, such as manufacturing, food preparation etc, to allow a fair comparison between buildings.
Our surveyor will need access to all parts of the building, including any plant rooms. They will take a set of measurements, notes and photographs of various elements of the building. For a Commercial EPC in Kingston-upon-Hull on a building sized such as, for example, a regular single storey coffee shop, the site visit usually takes approximately 30 minutes. Survey time is however dependent on the size and the complexity of the property, so may take several hours or more for a complex building such as a large care home.
Once our assessor has visited the site, all the data collected will be used to make a 3d model of the building in specialist software. From this an EPC calculation will be run, using the Simplified Building Energy Model (SBEM) methodology, giving the building an EPC score on an A to G scale. This score relates to how much CO2 was produced providing the energy to condition, light, ventilate and provide domestic hot water for the building.
Alongside the EPC report, the SBEM calculation also provides a Recommendation Report (RR), however this report, which is automatically generated by the software, is very generic, so alongside your Commercial EPC in Kingston-upon-Hull we can also provide a much more specifically tailored report examining the least disruptive and most cost effective ways to achieve a target EPC rating. This is in the form of our Minimum Energy Efficiency Standards (MEES) reports.
We are always happy to provide more in depth information on Commercial EPCs, including on Commercial EPC exemptions. So please Contact Us for more information.
Other services in your area: